File Operations - Cisco 3600 Series Installation Manual

Chapter 5 Installing Memory in the Router
Enter a Directory and Determine Which Directory You Are In
To enter a directory in Compact Flash memory, use the cd flash:/directory-name command.
To determine which directory you are in, use the pwd command.
If you enter only cd, the router will enter the default home directory, which is
The following example shows output for the following actions:
•
•
•
•
•
•
•
Router# cd
Router# pwd
flash:
Router# dir
Directory of flash:/
1580
128094208 bytes total (121630720 bytes free)
Router# cd config
Router# pwd
flash:/config/
Router# cd
Router# pwd
flash:
Procedures for Use with Class B Flash File System
The following file and directory procedures are useful for Compact Flash memory cards formatted with
a Class B Flash file system.

File Operations

Copy Files
To copy the files to another location, use the copy flash: source-filename {flash: | tfp: | lex: | null: |
nvram: | pram: | rcp: | system: | tftp: | xmodem: | ymodem: | running-config | startup-config}
destination-filename command.
The following example shows output for copying a configuration file to the startup configuration in an
internal Compact Flash memory card (
Router# copy flash:my-config1 startup-config
Destination filename [startup-config]?
[OK]
517 bytes copied in 4.188 secs (129 bytes/sec)
OL-2056-02
Entering the home directory of a Compact Flash memory card (
Verifying that you are in the home directory
Displaying the contents of the home directory
Entering the directory
/config
Verifying that you are in the
Returning to the home directory (
Verifying that you are in the home directory
3 -rw- 6458208
drw- 0
Installing and Formatting Compact Flash Memory Cards in Cisco 3631 Routers
directory
/config
)
flash:/
Mar 01 1993 00:04:08 c3725-i-mz.tmp
Mar 01 1993 23:48:36 config
):
flash:
Cisco 3600 Series Hardware Installation Guide
.
flash:/
)
flash:/
5-55