Cisco 3600 Series Installation Manual page 32

Closing the Router
Figure 5-26 Replacing the Cisco 3631 Router Cover
1
Insert tabs and slide cover
Reinstall the cover screws.
Step 4
Reinstall the chassis on a rack or desktop.
Step 5
Reconnect network interface cables.
Step 6
Power ON the router.
Step 7
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch
handle and reinstate power by moving the handle of the circuit breaker to the ON
position. To see translations of the various warnings that appear in this publication, refer
to the Regulatory Compliance and Safety Information document that accompanied this
device.
Cisco 3600 Series Hardware Installation Guide
5-32
Chapter 5 Installing Memory in the Router
1
2
Close cover
2
OL-2056-02