Switching On The Minox Dsc; Using Flash/Display Unit; Distance Setting - Minox DSC Instruction Manual

This disengages the locking action of the flash
module with the camera.
Note: Before connecting the external flash with
the camera you must remove the safety chain
from the camera (DSC), if attached.

Distance Setting:

In the following please find the depth of view for
distance setting:
Setting
Infinity
1.1
0.6
36
Range (meter)
~ 1.6 to infinity
~ 0.8 to ~ 1.6
~ 0.5 to ~ 0.7

Switching on the MINOX DSC

To switch the DSC on press the On/Off button
and hold it down until the LED lights up blue (in
the Photo/Video mode) or green (in the Playback
mode).
The switching on of the DSC takes effect with a
delay of a few seconds to avoid any unintentional
switching on of the MINOX DSC.

Using Flash/Display Unit

The followings operations can only be done af-
ter the Flash Unit is connected to the Spycam
properly. Otherwise the Flash Unit is in power-
off state.
Switch On the Display
Switch the Display On/Off button to the ON side
and switch on the Spycam. You can see the pre-
view on the Display.