Shooting; Winding Crank Handle - Minox DCC Rolleiflex 5.0 Owner's Manual

Shooting

Power switch
Shutter release button
38

Winding Crank handle

Press Power switch to turn power
on.
An image will appear on Monitor
display in 1-2 sec.
Unfold Crank handle as shown (Ar-
Å
row ) and turn it 360° clockwise
Ç
(Arrow ) .
* Turn the handle before shooting
each picture. Otherwise the
shutter remains locked.
Shooting
When composition is decided de-
press the shutter button all the
way.
Display will show:
"FOCUSING"
ê
"CAPTURING"
ê
"SAVING"
* Focusing may take longer time
under low light conditions.
* Image may be captured even when
the shutter button is not fully de-
pressed, but crank handle may not
be released in this case.
About focus-lock
When the shutter release button is
depressed, the "FOCUSING" signal
is displayed once. Focusing is com-
pleted when the display disappears,
and the camera is in a focus-lock
condition. Remove your fi nger from
the shutter release button to cap-
ture ("CAPTURING") and save the
image ("SAVING").
39