IBM xSeries 206 User Manual page 41

– Advanced Configuration
Select this choice to view or change the settings for advanced configuration
options.
v SCSI Disk Utilities
Select this choice to view the SCSI IDs assignments or to format a SCSI device.
Select a device from the list and read the instructions on the screen carefully
before making a selection.
If you press Ctrl+A before a selected drive is ready, an Unexpected SCSI
Command Failure screen might appear. Restart the server and watch the
SCSISelect messages as each drive spins up. When the selected drive is ready,
press Ctrl+A.
For information about how to use this utility to perform an initial RAID level-1
configuration on your server, see "Using the SCSISelect Utility program (for SCSI
RAID)" on page 24.
Chapter 2. Configuring your server
29