Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose; Selecting The Correct Cuff - A&D UA-705 Instruction Manual

Installing / Changing The Batteries

1. Remove the battery cover.
2. Insert a new battery into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
Use only R6P, LR6, AA or equivalent battery.
3. Close the battery cover.
CAUTION
Insert the battery as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks in the display, replace the battery with a
new one.
(LOW BATTERY mark) does not appear when the battery is drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified battery only. The battery provided with the device is for
testing monitor performance and may have a limited life.
Remove the battery if the device is not to be used for a long time.
The battery may leak and cause a malfunction.
The stored data are cleared when the batteries are removed.

Connecting The Air Hose

Insert the air connector plug into
the air socket firmly.

Selecting The Correct Cuff

Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index and proper fit range, on the cuff, tell you if you are attaching the
correct cuff. (Refer to "Attaching The Arm Cuff" on next page)
If the index points outside of the range, contact your local dealer to purchase a
replacement cuff.
Arm Size
32 cm to 45 cm
22 cm to 32 cm
－
Arm size: The circumference at the biceps.
Note: This UA-705 monitor is NOT designed for using a small cuff.

Using The Monitor

Recommended Cuff Size
Large cuff
Medium cuff
Small cuff
English 5
Order No.
UA-CUFDBKLA-EC
UA-CUFDBKAU-EC
－