Installation Guide
N O TE
10
Follow the step- by- step instructions shown in the following flowchart
to get started with the preparations and installations of your Agilent
U2121A- Based RF Switch Driver Software.
You need to install the IVI-COM driver if you are going to use the U2121A- 101
with Agilent VEE Pro, LabVIEW, or Microsoft
B. Install prerequisites and software
C. Connect the hardware solution to your PC
D. Launch the Agilent U2121A-Based RF
®
Visual Studio
A. Check your system
Switch Driver Software
®
.
U2121A-101 Operating Guide