Preset Modes; Displaying The Monitor's Information; Additional Information; Warning Messages - IBM P76 Operating Instructions Manual

Preset Modes

Resolution Horizontal
No. (dots lines) Frequency
640 480 31.5 kHz
1
2 640 480 37.5 kHz
3 640 480 43.3 kHz
800 600 46.9 kHz
4
5 800 600 53.7 kHz
6 1024 768 60.0 kHz
1024 768 68.7 kHz
7
8 1280 1024 80.0 kHz
Displaying the Monitor's
Information
You can display the model name, serial number and year of
manufacture using the monitor's INFORMATION OSD.
Press and hold the button for 5 seconds.
The INFORMATION OSD appears.
Example:
The INFORMATION OSD includes the model name, serial
number and manufactured year.
The OSD automatically disappears after about 30 seconds.
Technical Features
Vertical Graphics
Frequency Mode
60 Hz VGA
75 Hz VESA
85 Hz VESA
75 Hz VESA
85 Hz VESA
75 Hz VESA
85 Hz VESA
75 Hz VESA
I NFORMA T I ON
MODE L : I BM P 7 6
SER NO : 1 2 - 3 4 5 6 7
MANUF ACTURED : 1 9 9 9 - 5 2
Getting Started

Additional Information

Warning Messages

If no pictures appears on the screen, one of the following
messages appears on the screen.
I NFORMA T I ON
MON I TOR I S WORK I NG
OUT OF SCAN RANGE
CHANGE PC SE T T I NG
If MONITOR IS WORKING appears on the screen
1 The monitor's condition
MONITOR IS WORKING
This indicates that the monitor is working properly.
2 The input signal condition and the remedies
CHECK SIGNAL CABLE
This indicates that no signal is input. Check that the
video signal cable is properly connected and all plugs
are firmly seated in their sockets.
OUT OF SCAN RANGE and CHANGE PC SETTING
These indicate that the input signal is not supported by
the monitor's specifications. Check that the video
frequency range is within that specified for the monitor.
(Horizontal: 30 – 96 kHz, Vertical: 48 –120 Hz)
If MONITOR IS IN POWER SAVE MODE appears on the
screen
1 The monitor's condition
MONITOR IS IN POWER SAVE MODE
This indicates that the computer is in power saving
mode. This message is displayed only when your
computer is in a power saving mode and you press any
one of the buttons on the monitor.
2 The remedies
ACTIVATE USING PC
Try pressing any key on the computer, and confirm that
your computer's graphic board is completely seated in
the correct bus slot.
For more information, see "Troubleshooting" on page 16.
Technical Features
15
GB
F
ES
C