Memory Module Removal; Hdd Removal - Toshiba Tecra 8200 Series Service Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

MEMORY MODULE REMOVAL

Memory clips
1. Turn the computer upside down.
2. Remove two M2.5x4 black flat head screws and
remove the memory cover.
3. Spread the memory clips outward and pull the memory
module out of the connector on a 45 degree angle.
Wireless Black coax cable
LAN card
3. Disconnect the Black and White coax from PJ12 and
PJ13.
4. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.
Tecra
8200 Series
M2.5x4 black
flat head screws
Memory
cover
Memory
module
Mini-PCI
connector
clips
White coax cable
TOSHIBA
Tough Enough for Today's World.
TM
WIRELESS LAN REMOVAL
Mini PCI cover
1. Turn the computer upside down.
2. Remove two M2.5x4 security torx screws securing
the Wireless LAN cover and lift out the cover.

HDD REMOVAL

HDD cover
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screws
securing HDD cover
3. Push up the raised nubs to remove the HDD cover.
M2.5x4 security torx screw
M2.5x4 black
flat head screws