Toro 38584 Operator's Manual page 16

Figure 32
4. Hold the discharge chute in the straight-ahead
position, pull the lower cable casing downward
until you remove all the slack from the cable, and
tighten the screw on the lower cable clamp securely
(Figure 33).
Figure 33
1. Lower cable casing
5. Pull the upper cable casing forward until you remove
all the slack from the cable, and tighten the screw on
the upper cable clamp securely (Figure 34).
1. Upper cable casing
Note: Do not over-tension the cables. If the cables
are over-tensioned, the Quick Shoot will be hard to
operate.
16
Figure 34