Oki OJ2010 User Manual page 58

Print Media Problems
Print Media Problems
Problem
Paper Jam
Paper sticks together/Multiple
sheets of paper feed
Paper fails to feed
Paper skews or buckles
OJ2010 ( 96-02-07 )
1) Turn the printer power off and open the paper load
door.
2) Pull firmly on the paper to remove it.
3) Close the paper load door and turn the printer power
on.
4) Resend your print job. Start with the page on which
the
paper jam occured.
- Make sure there is not too much paper in the sheet
feeder.
- Make sure you are using the correct type of paper.
- Remove paper from the sheet feeder and flex or fan
it.
- Make sure the paper load door is closed.
- When loading paper, do not force the paper down
into
the printer.
Note: Humid conditions may cause some paper to stick
together.
Make sure the paper load door is closed.
Remove any obstructions inside the printer.
- Make sure there is not too much paper in the sheet
feeder.
- Make sure the paper guides do not cause the paper
to
bow in the sheet feeder.
- Make sure you are using the correct type of paper.
- When loading paper, do not force the paper down
into
the printer.
- Make sure the right side of the paper is against the
right paper guide and the left paper guide is set
against
the left side of the paper.
- Make sure the envelope guides are not in the
envelope
position.
- If loading paper in the manual feeder, make sure the
media guide is next to the left side of the paper.
- Make sure the printer is installed on a flat, level
surface.
Action