Oki OJ2010 User Manual page 44

8) Remove the replacement print cartridge from its packaging.
Do not touch the copper-colored area! Hold the cartridge by the plastic areas only.
9) Carefully remove the tape covering the printhead.
Be sure to remove all the tape.
Do not touch the copper-colored area!
10) Insert the cartridge in the carrier (black print cartridge goes on left (match black handle to
black strip on carrier); color print cartridge goes on right (match green handle to green strip
on carrier).
11) Push back firmly on the handle until the cartridge snaps into place.
If the cartridge moves loosely in the carrier, it is not locked in place: repeat this step.
12) If you are installing a new print cartridge, click New Cartridge Installed , then go on to
step 13.
If you are removing and reinstalling the same print cartridge, click Old Cartridge Installed ,
and you are done!
13) Click Align Cartridges .
The Align Cartridges dialog box appears on your screen and the printer prints a test page
OJ2010 ( 96-02-07 )