GE GFDR485 Owner's Manual page 6

Control settings.
Add Time
®1
Add Time
Press to add time to the Steam Dewrinkle,
Warm Up, Air Fluff or Time Dry cycles.
[
Temp I
Dry Tamp
You can change the temperature of your dry
cycle.
High For regular to heavy cottons.
Medium For synthetics, blends and items labeled Permanent Press.
Low For delicates, synthetics and items labeled Tumble Dry Low.
Extra Low For lingerie and special-care fabrics.
No Heat This option may only be used with Air Fluff, in which items are tumbled without
heat.
!
Level
)
Sensor Dry Level
The sensor continuously monitors the amount of
moisture in the load. When the moisture in your
clothes reaches your selected dry level, the dryer
will stop.
NOTE:Sensor dry Level only works with
Cottons, Normal, Active Wear, Delicates,
Speed Dry, Bulky, Towels/Sheets, Sanitize
and Steam Dewrinkle cycles.
Extra Dry Usefor heavy-duty fabrics or items that should be very dry, such as towels.
Ion some models)
More Dry Usefor heavy or mixed type of fabrics.
Dry Usefor normal dryness level suitable for most loads. This isthe preferred cycle for
energy saving.
Less Dry Use for lighter fabric (ideal for ironing).
Damp Forleaving items partially damp.
Start/Pause
My Cycle
--/
Iold 3 Second5 to Store
Start/Pause
Press to start a dry cycle. If the dryer is
running, press it once and it will pause the
dryer. Press it again to resume the dry cycle.
Ny Cycle
Set up your favorite combination of settings
and save them here for one touch recall.
These custom settings can be set while a cycle
is in progress.
To store a Ny Cycle combination of settings:
1. Select your drying cycle.
2. Change Temp and Level settings to fit your
needs.
3. Select any drying options you want.
4. Press and hold the NV Cycle button for 3
seconds to store your selection. A beep will
sound and the button will light up.
To recall your stored Ny Cycle combination:
Press the NY CYCLEbutton before drying a
load.
To change your stored Ny Cycle
combination:
Repeat steps 1-4.
6