GE GFDR485 Owner's Manual page 5

Control settings.
Quick Start
E] Press the Power button.
If the screen is dark, a press
of the Power button will
"wake up" the display.
Power
@
Normal
M_ed to_s Towels!
'_ C°tt°ns t 0 0 Sheets
Select a dry cycle. (Defaults are set 0,,,y
B_d_J,,_ _ 0 Sanitize
for each cycle. These default Aoti .....
_,_
Wear •
settings can be changed. See
Delicates O _ _Vpar rn
Control settings for more
information.) spood Ory
Dry
E] Press the Start/Pause button.
Start/Pause
GEAppliances.com
Power
Press to "wake up" the display. If the display is active, press to turn the dryer off.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
Normal/Mixed Loads For loads consisting of cottons and poly-blends.
Cottons For cottons and most linens.
For large coats, bed spreads, mattress covers, sleeping bags, blankets, comforters, jackets, small
Bulky/Bedding rugs, and similar large and bulky items.
Clothing worn for active sports exercise and some casual wear. Fabrics include new technology
Active Wear finishes and stretch fibers such as Spandex. Alsofor clothing labeled EasyCure or Perma Press:
Forwrinkle-free and permanent press items.
Delicates For lingerie and special-care fabrics.
Speed Dry For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if
the previous cycle left some items damp, such as collars or waistbands.
Towels/Sheets Use for towels OR sheets. It is not recommended to mix towels and sheets in the same load.
Reducescertain types of bacteria by 99.8%, including: Staphylococcus aureus, Pseudomonas
Sanitize aeruginosa, and Klebsiellapneumoniae. The antibacterial process occurs when high heat is used
during a portion of this drying cycle.
Steam Dewrinkle
Ideal for loads left in dryer for an extended time.
Full Loads
Warm Up Provides 10 minutes of warming time to warm up clothes.
Air Fluff
Time Dry
Use to tumble items without heat.
Use to set your own dry time. Time Dry is also recommended for small loads. To use:
!. Turn dry cycle dial to Time Dry.
2. Increase the drying time by pressing the Add Time button.
Note: This button only increases the time. When max time is reached, pressing the button
again will reset the counter to the lowest setting.
5. Select the Temp.
4. Close the door.
5. Press Start/Pause.