Cisco 7920 Configuring page 15

Note: The WEP key input appears as asterisks. This is normal behavior.
For more information on the configuration of WEP keys, refer to Configuring WEP and WEP
Features.
c. Leave the Key Size set to the default value (128 bit).
d. Click Apply−Radio0 or Apply−All (as appropriate) to save the settings.
7. When this popup warning appears, click OK:
Verifying
This section helps you to verify the association of the Cisco 7920 with the Cisco Aironet 1200 AP and with
the CallManager.
1. If you entered all of the settings correctly, the Cisco 7920 should have associated and authenticated
with the Cisco Aironet 1200 AP.
This appears on the Association page.
Note: You may have to refresh the page.