Deselecting Ranges; Displaying Navigation During Stand-By - Furuno FMD-811 Operator's Manual

1.25 Deselecting Ranges

The unit has 14 ranges, some which you may
not require. You can deselect up to eight
ranges as follows.
1) Press the [MENU] key.
2) Select Mode & Function and press the
[ENT] key.
3) Select Range and press the [ENT] key.
Active ranges appear in reverse video.
4) Press t or s to select range to disable (or
enable). Current selection is underlined.
5) Press [ENT].
6) Repeat steps 4 and 5 to disable (or en-
able) other ranges.
7) When finished, press the [MENU] key.
1.26 Displaying Navigation
During Stand-by
Various navigation data can be displayed
during stand-by. A barometer is built in the
unit; atmospheric pressure appears, in graph
form, on the navigation dat display during
stand-by. If your navigation aid can output
data in NMEA 0183 format, your vessel's
position in latitude and longitude, the range
and bearing to waypoint, speed, course, date,
time and cross track error may be input to
the unit, and be seen in the bottom text area
during stand-by. Further, with video sounder
input, depth may be displayed, both digitally
and in graph form.
Procedure
1) Press the [MENU] key.
2) Select the Nav Data menu and press the
[ENT] key.
3) Select STBY Display to NAV and press
the [ENT] key.
4) Press the [MENU] key.
Note: The depth display scale changes auto-
16
matically with depth and the maximum depth
is 1,000 meters. Further the unit of depth mea-
surement is fixed to meters.
CAUTION
The barometer and depth displays are intended
as reference. Any data displayed by them
should be used with extreme caution.
ST–BY
(hPa)
1020
1010
1000
900
990
-12 -9 -6 -3
(HOUR)
BAROMETER
DATE TIME
08.22 15:19
DEPTH
827 m
WAYPOINT
12.0NM 114.8°R
XTE
L
0.5
1
Figure 1-20 Navigation data display
during stand-by
(MIN)
2 1 0
500
1000
(m)
DEPTH
TEMP CRS
30.0 0.0°M
°C
XTE SPD
0.6NM R 30.0KT
POSI L/L
65°43.98N
165°43.96E
XTE
R
0.5
0 1
(NM)