Selecting The Display Mode - Furuno FMD-811 Operator's Manual

1.13 Selecting the Display
Mode
The display mode may be selected with the
[DISP MODE] key. Four modes are avail-
able (with navigation input): Normal, Nor-
mal + Window, Normal + Nav Data, and
Normal + Window + Nav Data.
Window Display
Nav Display
Window Display
Nav Display
WIDE /
ON
VRM EBL +CURSOR
**.** NM ***.* R ***.**NM ***.* R
WIDE /
ON
VRM EBL +CURSOR
**.** NM ***.* R ***.**NM ***.* R
Figure 1-10 Display modes
Each time the key is pressed the display
mode changes in one of the sequences shown
below, depending on equipment connected
and menu settings.
Note: In the window display mode, the [DISP
MODE] key reselects zoom area. To select the
display mode while in the window display
mode, press the key twice.
ZOOM
/ OFF
VRM EBL
**.** NM ***.* R
ZOOM
/ OFF
VRM EBL
**.** NM ***.* R
ZOOM
+CURSOR
***.**NM ***.* R
ZOOM
+CURSOR
***.**NM ***.* R
9