Check Firmware Version - JVC DLA-X3 Firmware Update Instructions
Dila projector
Hide thumbs
Also See for DLA-X3:
- Instructions manual (79 pages) ,
- User manual (63 pages) ,
- Remote control manual (25 pages)
Advertisement
JVC DILA projector Firmware Update Instructions
After this happens, press the Standby/On button on the projector.
CHECK FIRMWARE VERSION
To finish the update, switch off the projector and wait until the Standby LED has stopped
flashing, then remove the mains lead from the projector, remove the USB cable, refit the
connector cover, plug the mains lead back in, switch on and enjoy.
Produced by JVC (ver1.3)
Page 6 of 6
Advertisement
