Maintenance; To Replace Air Filters; To Clear Clogged Hose - Electrolux 2100 Instructions Manual

Table of Contents

Advertisement

Maintenance

Follow the steps listed below in order to ensure peak cleaning performance.
Vacuum brushes with end of hose handle after use.
Wipe tools occasionally with damp cloth or sponge and mild detergent.
Change bags and/or filters regularly. The air filter should be replaced after each use of six filter bags.
Periodically check revolving brushes for build-up of lint, hair, or other foreign material and remove as necessary.
Store cleaner in dry area; never outdoors.
Have cleaner checked periodically by an authorized Aerus™ service center.

To replace air filters

Slide accessories off of accessory clip.
Gently press filter cover latch and lift off the exhaust air diffuser (Fig. V).
Lift air filter out and replace with a new one (Fig. W).
Engage the two tabs on the front of the exhaust air diffuser in the matching openings on the canister and snap
into place.

To clear clogged hose

Slide accessories off of accessory clip.
Gently press filter cover release and lift off the exhaust air diffuser (Fig. V).
Lift air filter out (Fig. W).
Attach machine end of hose into blower outlet hose receptacle.
Place handle end of hose into a container. Turn the cleaner on and blow object into container (Fig. X).
Once hose is clear, press the release on blower outlet hose receptacle and pull hose out.
Reinstall air filter, engage the two tabs on the exhaust air diffuser (Fig. V) in the matching openings on the
canister and snap into place.
8
Fig. V
Fig. W
Fig. X

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2100 and is the answer not in the manual?

Questions and answers

Joseph Sklar
March 31, 2025

The vacuum will not turn on. Cannot turn circular dial to normal; it's stuck.

1 comments:
Mr. Anderson
March 31, 2025

The Electrolux vacuum model 2100 may not turn on if the power cord is not properly plugged in, the toe switch is not pressed correctly, or if the vacuum motor has shut off due to overheating or an obstruction. The circular dial may be stuck due to debris, incorrect use, or internal damage. Make sure the unit is off, check for obstructions, and inspect the dial for any physical blockage or misalignment.

This answer is automatically generated

Joseph Sklar
March 31, 2025

The control dial is stuck. Cannot move it to normal. Vacuum won't start. The power symbol doesn't illuminate.

1 comments:
Mr. Anderson
March 31, 2025

To fix a stuck control dial on an Electrolux 2100 vacuum that won’t start and has a non-illuminating power symbol, follow these steps:

1. Check Power Cord: Ensure the power cord is properly plugged in and fed slowly into the unit. Do not let it whip into the cord winder.

2. Toe Switch: Press the toe switch gently on top of the unit to start the vacuum. If it doesn’t start, press it again to ensure it's not stuck.

3. Control Dial: Adjust the control dial to a known working setting like “NORMAL.” If the dial is stuck, try gently turning it back and forth to free it. Avoid using force.

4. Suction Control: Open the suction control to prevent excess resistance that may affect startup.

5. Check Full Bag Indicator: Make sure the vacuum bag is not full and is installed correctly. A full or misaligned bag can prevent the vacuum from starting.

6. Filter Lock: Ensure the filter is locked in place, as an unlocked filter may stop the vacuum from operating.

If the vacuum still won't start and the power symbol does not light up, the issue may involve internal wiring, a faulty switch, or a failed motor, which may require professional repair.

This answer is automatically generated

Doug Holmberg
January 21, 2025

How to replace the off,on switch on a 2100 diplomat

Table of Contents

Save PDF