Electrolux 2100 Instructions Manual page 9

To replace filter bags
Protect your Warranty! Always use genuine Aerus™ high-efficiency,
four-ply, self-sealing filter bags. Used exclusively, the Aerus™ filter bag will
promote longer motor life and more efficient cleaner operation. Be sure the
filter bag is in place before operating the machine.
When it is time to change filter bags, the bag change indicator on the
information panel lights and the cleaner shuts off. The cleaner controls this
function automatically and is regulated by the control dial setting.
NOTE: The filter bag may not appear completely full when vacuuming fine
dirt because this type of dirt clogs the pores of the bag more quickly than
coarse dirt. However, it is still time to change the filter bag in order to
restore cleaning efficiency.
• Stand the machine on its end and press the front cover release.
As the cover is opened, the filter bag seals itself for removal (Fig. Y).
•
• Throw the old bag away - never attempt to re-use filter bags.
• Install a new filter bag and close the cover (Fig. Z).
Storage
For best performance, carefully store cleaner in a dry place. Do not store outdoors. Slide crevice tool and
combination dust brush/upholstery tool onto the accessory clip on canister (Fig. AA). Use the hook on end of the sheath
to store the wand and power nozzle as a unit (Fig. BB).
Fig. AA
Fig. BB
Fig. Y
Fig. Z
9