Combination Switch; High Beam Flasher; High-Beam Headlamps; Turn Signals - Mercedes-Benz SLK350 Operator's Manual

Press the R button.
X
The yellow R indicator lamp in the
instrument cluster lights up.
To switch off the rear fog lamp: press the
X
R button.
The yellow R indicator lamp in the
instrument cluster goes out.
i
If you switch the engine off (SmartKey in
position 1 in the ignition lock) and then
restart it, the previous rear fog lamp
settings are restored.
Headlamp cleaning system
If the "Wipe with washer fluid" function is
operated five times ( page 113) while the
Y
lights are on and the engine is running, the
headlamps are cleaned automatically. When
you switch off the ignition, the automatic
headlamp cleaning system is reset and
counting is resumed from 0.

Combination switch

Turn signals

High-beam headlamps

:
Right turn signal
;
High-beam flasher
=
Left turn signal
?
Exterior lighting
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or c or
X
Ã.
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
In the c or à position, the high-
beam headlamps are only switched on
when it is dark and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam
X
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
X
of arrow =.
107
Z