Page 2
The FDTV2 installs in minutes and is easy to use. The FDTV2 has a patented design that lets it receive signals from 360-degrees and work in both the horizontal and vertical planes, which means it requires virtually no adjustments once you’ve put it in place.
Page 3
Test the antenna in the different positions before putting it in its permanent position. Please Note: Do not place your FDTV2 near large metal objects or appliances that could create interference.
Page 4
Installation (continued) Attaching the Stand The provided stand attaches to the back of the FDTV2 for standing the antenna upright. To attach the FDTV2 stand: 1. Line the pegs on the stand with the slots on the back of the antenna.
Page 5
Installation (continued) Connecting the FDTV2 You can connect the FDTV2 directly to your TV or use it with a converter box or other tuning device with an antenna input (such as a cable box or satellite receiver). To connect the FDTV2 directly to your TV: 1.
Page 6
Installation (continued) To connect the FDTV2 to a converter box: 1. Make sure your converter box is turned off. 2. Connect the FDTV2’s built-in cable to the antenna input on the converter box. FDTV2 3. Follow the directions in the...
Large metal objects may prevent the antenna signal from reaching the antenna. Try placing the antenna outside of or above the metal cabinet. If you decide to keep the FDTV2 on a metal cabinet, use it in the upright position.
Page 8
This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/ province. U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788 CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5 For customer service and...
Need help?
Do you have a question about the FDTV2 and is the answer not in the manual?
Questions and answers