Assembly; Needed Tools - ProForm Trailrunner 4.0 PFTL16010.0 User Manual

ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials, Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton, This is normal and does not affect performance, If there is lubricant on top
of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex_ and your own Phillips screwdriver _ and adjustable
wrench _:_.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the
key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging
parts, do not use power tools for assembly.
3/8" Jam Nut (7)-2
3/8" Star Washer
(6)-10
3/8" x 1 3/4" Bolt (3)-1
#8 x 3/4" 3/8" x 1 1/4"
Tek Screw (24)-4 Bolt (2)-6
3/8" x 2" Bolt (4)-1
3/8" x 3 3/4" Bolt (5)-4