ProForm 595LE 831.297773 User Manual page 13

Table of Contents

Advertisement

PROBLEM:
The walking belt slows when walked on
soLUTION:
a. Use only a UL41sted surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less In
length.
b. If the walking belt Is overtightened, treadmill perfor-
mance rna. y decrease and the walking belt may be
permanently damaged. Remove the key and UN-
PLUG THE POWER CORD. Using the allen wrench,
tum both rear roller adjustment bolts countercJock-
wise, 114 of a turn. When the walking belt is propedy
tightened, you should be able to lift each slde of the
walking belt 3 to 4 Inches off the walking platform. Be
careful to keep the walking belt .centered. Plug in the
power cord, Insert the key and run the treadmill for a
few minutes. Repeat until the walking belt is prepedy
tightened.
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.
PROBLEM: The walking belt is off-center when walked on
SOLUTION:
a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using
the ellen wrench, tum the left rear roller adjustment
bolt cleckwise, and the fight bolt countereledoNIse,
114 of a turn each. Be careful not to overtighten the
walking belt. Plug In the power cord, Insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt Is centered.
b. If the walking belt has shifted to the fight, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt counterclockwise,
and the fight bolt cled0_se,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmill for a few m|nutes. Repeat until
the walking belt Is centered.
PROBLEM: The welking
belt slips when walked on
SOLUTION:
a. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the walking belt
is correctly tightened, you should be able to lift each
side of the walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking belt centered.
Plug in the power cord, insert the key and carefully
walk on the treadmill for a few minutes. Repeat until
the walking belt is properly tightened.
a
1:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

595le831.297773

Table of Contents