Electrolux EAS(C,E)09C2ASK(W,S,M) Instruction Manual page 12

21 electrolux electrical work
Connect the cable to the indoor unit
1. The inside and outside connecting
cable can be connected without
removing the front grille.
2. Connecting cable between indoor unit
and outdoor unit shall be approved
polychloroprene sheathed flexible cord,
type designation H07RN-F or heavier
cord.
3. Lift the indoor unit panel up, remove
the electrical box cover by loosening
the screw.
4. Ensure the colour of wires of outdoor
unit and the terminal Nos. are the same
to the indoors respectively.
5. Wrap those cables not connected with
terminals with insulation tapes, so that
they will not touch any electrical
components. Secure the cable onto the
control board with the cord clamp.
< 18000 btu's
CABLE (Cool model)
Cable code
40mm
10mm
> 18000 btu's CABLE
10mm
Electrical box
< 18000 btu's CABLE (Heat & Cool model)
or
"Cable A" "Cable B"
Cable code Cable code
40mm
40mm
10mm 10mm
(Heat & Cool model)
"Cable C"
Cable code
40mm
< 24000
cover COOL MODELS
"Connector A"
Wire connector of indoor unit
1 2(N) 3 4
Cables
board
Btu's
or "Connector B"
"Connector A"
1 2(N)
or
Cables
board
MODELS
24000 Btu's
"Connector A"
Wire connector of indoor unit
Cables
board
electrical work electrolux 22
< 24000 Btu's
HEAT AND COOL MODELS
or "Connector B"
Wire connector of indoor unit
1 2(N) 3 4
1 2(N) 3 4
or
Cables Cables
board board