Wiring; Connections - Furuno 1622 Installation Manual

Furuno marine radar user manual
Hide thumbs Also See for 1622:
Table of Contents

Advertisement

2.1 Connections

Connect the antenna cable, the power cable
and the ground wire as shown in Figure 13.
ANTENNA UNIT
FUSE (5 A)
BLK (-)
WHT (+)
POWER SUPPLY
12/24 VDC
Figure 13 Connections

2. WIRING

DISPLAY UNIT
NMEA
DJ-1
10.2-31.0VDC
1
3GND
2
GROUND
Connect ground
wire to bolt fastened
(or welded) to hull.
Connection of external
equipment
Navigator/echosounder
This radar can receive the following NMEA 0183
format data sentences from a navigator or
echosounder:
GLL:
Geographic position - Lat/Long
BWR:
Bearing and Distance to Waypoint -
Rhumb line
BWC:
Bearing and Distance to Waypoint
GLC:
Geographic Position - Loran-C
GTD:
Geographic Position - Time Difference
RMA:
Recommended Minimum Specific
Loran-C Data
RMB:
Recommended Minimum Navigation
Information
RMC:
Recommended Minimum Specific
GPS/Transit Data
VTG:
Track Made Good and Ground Speed
MTW:
Water Temperature
DBT:
Depth Below Transducer
DBS:
Depth Below Surface
DPT:
Depth
GGA:
GPS - Rx status, L/L
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents