Page 1
PERFORMANCE GUIDE LABEL MODEL NO. PLATE If you need SERVICE or PARTS for your Kenmore dryer: ELECTRIC Be ready to give your Sears Service Department the model number, sedal number and date of MODEL 64681 purchase. Write in below. The plate IM with model and serial numbers is located behind the dryer door.
Page 2
How to dry a load of laundry Clean lint screen before each load. Set Cycle Selector Control I! --_ Remove load when dry. thePUt door.laundry into dryer and shut PUsh the Start Control Il! to start your dryer. t-_ I r-2_ I_Qmwz Ill Cycle Selector Control...
Page 3
CYCLE SELECTOR CONTROL AUTO DRY I Normal/Permanent Press AIR DRY Cycle Cycle Use this cycle to get up to 20 minutes of drying time in room temperature air. Use this setting for items that will not tolerate heat, such as plastics, Use this cycle for most loads of sturdy clothes or synthetic, permanent foam rubber, etc.
Page 4
FEATURES Lint Screen Performance Guide Label Keep the lint screen clean. A lint-clogged screen will slow down the flow Located inside the dryer door. Gives information on what to do if dryer of air. This makes drying time longer and wastes energy. Clean the lint does not perform normally.