NEC Express5800/320Lb Windows Release Note page 14

1. Start [Start]-[Administrative Tools]-[Services], and right-click the
following services and display properties.
- Stratus ftServer Maintenance and Diagnostics(MAD)
- Stratus ftServer Provider Manager
- Stratus ftServer Storage Manager
2. Select "Dependencies" tab, and confirm the following components are
added on "This service depends on the following system components".
- Plug and Play
- Remote Procedure Call (RPC)
- Windows Management Instrumentation
- Confirm recovery program of service
1. Start [Start]-[Administrative Tools]-[Services], and right-click the
following service and display properties.
- Stratus ftServer Maintenance and Diagnostics(MAD)
2. Select "Recovery" tab, and confirm that the following path is set on
"Program".
C:\ProgramFiles\Stratus\Utility\recovery.bat
(when a system drive is "C")
11. Cautions for using the Windows Server 2003 Recovery
Console
Windows Server 2003 Recovery Console cannot execute the copy command
to the following hard disk. "Access is denied" message will appear.
Dynamic disk
When you are executing the copy command to the disk shown above in the
Windows Server 2003 Recovery Console, you must make the following
setting.
Note:
[Setting]
1) [Local Security Policy] setting
Note)
This setting should be made on the Windows Server 2003 in advance.
1. Start Windows Server 2003, and log on as a user with the administrator
authority.
2. Start [Start]-[Administrative Tools]-[Local Security Policy].
3. Select the [Local Policies]-[Security Options] from the left window of the
[Local Security Settings] screen.
4.Double-click on [Recovery console: Allow floppy copy and access to all
drives and all folders] in the right window, and enable the Security Setting.
12 Express5800/320Lb System Release Notes
The copy command can be executed to the basic disk.