Arriving At Waypoints; Gps Gain - Navman G-PILOT 3380 Operation Manual

7-2-3 Arriving at waypoints

If the GPS is following a route and the boat reaches an intermediate waypoint:
If the Waypoint Acknowledge alarm (see section 6-5) is off, the G-PILOT automatically starts steering
to the next waypoint in the route. If the Waypoint Acknowledge alarm is on, the G-PILOT shows the
following alarm:
The G-PILOT continues steering on the old course. Select "OK" to start steering to the next
waypoint.
When the boat reaches the final waypoint, the G-PILOT shows the following alarm:
The G-PILOT continues steering on the old course. Select "OK" change to Compass mode and
continue sailing at the current heading. Press
Note: To return to the last waypoint if the boat has passed the waypoint, restart the GPS navigating
to the waypoint.

7-2-4 GPS gain

In GPS mode, The GPS gain determines how much correction is applied to remove cross track error.
A high setting will cause the G-PILOT to steer quickly back towards the track. A low setting will
cause the G-PILOT to steer very gently back towards the track.
G-PILOT 3380 and Operation Manual
to return to STBY mode.
NAVMAN
37