Miscellaneous Functions - Philips PFS0001 User Manual

SAT HDTV Module

Miscellaneous functions

Restoring factory defaults
You can restore the appliance's factory defaults. Your own lists of favourites will
be cleared in the process.
1. Press OPTIONS and select Device menu and press OK.
2. Press the
3. Press the
firm.
4. Use the arrow to change the setting to Yes and press OK to confirm.
The appliance will reset by switching itself off and back on briefly afterwards.
5. Do a first-time installation, see page 60.
Changing picture and sound settings directly
You can change the audio and video settings while listening to or watching a pro-
gramme.
1. Just press the red colour button.
2. Make your changes as appropriate.
The red colour button controls Picture Scaling, i.e. the different screen formats.
Availability of this function depends on your general video settings, see
page 77, and the screen format of the programme you are watching.
The green colour button controls the available types of audio output (stereo,
mono, etc.).
The blue colour button controls the video resolution, i.e. the number of lines per
screen (576p, 576i, 720p or 1080i).
Displaying channel and system information
Whereas you will hardly ever need this information, it will be quite useful if you
do, e.g.:
to retrieve information about a channel or to check the strength and quality of
a channel signal,
to tell Technical Support the software version installed in your receiver and
other such information.
1. Press OPTIONS and select Device menu and press OK.
2. Press the
3. Select Channel information or System information.
Note: You cannot change any of the details. They are shown purely for informa-
tion at this point.
or arrow to select Box Settings and press OK to confirm.
or arrow to select Restore factory defaults and press OK to con-
or arrow to select Technical information and press OK to confirm.
74