SAT HDTV Module
Getting Started
Connect receiver to TV set
Make sure all appliances are turned off before you connect them up.
First establish all other connections, then plug the power supply connector into
the mains socket. This is to avoid possible damage.
Take heed of the manuals describing the other units.
The satellite receiver provides no options of connecting other appliances such
as audio equipment.
Wiring diagram
Steps:
1. To connect to the satellite dish
Attach the satellite cable to the receiver's antenna line in socket, LNB IN.
2. To connect to HDMI
Use a HDMI cable to connect the receiver's HDMI socket with the TV set's HDMI
line in socket.
Attention!
58