Synchronise Receiver And Tv Set; Add The Receiver To The Tv Home Screen - Philips PFS0001 User Manual

3. To connect to the mains
Attention!
Plug the appliance into a properly installed 230 VAC, 50 Hz wall outlet only. Do
not turn on the appliance until all other connections are made.
Connect receiver and mains socket with the pluggable power supply.
1. First of all, attach the power supply cord to the receiver's 12 V jack.
2. Connect the pluggable power supply to a power outlet.
Plugging the receiver's power supply plug into a wall outlet automatically turns on
the receiver.
3. Turn on the TV set.
4. Synchronise the receiver and TV set, see next section.

Synchronise receiver and TV set

Your TV comes with EasyLink set to On for automatic synchronisation. If this set-
ting is set to Off, you need to set it back to On.
To operate the satellite receiver, you need to set EasyLink Remote Control to On.
.
1. Press Home
2. Select Setup > Installation > Preferences > EasyLink and set it to On.
3. Select EasyLink Remote Control and set it to On.
4. Press Home to close the menu.
5. Select Watch TV and press OK.

Add the receiver to the TV Home screen

Add the satellite receiver to the TV Home screen for easy selection.
1. Press Home.
2. Select Add your devices and press OK.
3. Press OK to start.
4. Select with the arrows the correct icon and press OK.
5. Select with the arrows the HDMI connector you used to connect the receiver and
press OK.
6. Press OK to close.
Now start the first-time receiver installation, see page 60.
59
Operation