Editing Waypoint Data - Furuno GD-1700 Operator's Manual

2. PLOTTER OPERATION
Entering a waypoint from the waypoint list
You can manually enter waypoint position from the waypoint list as follows:
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST (lists waypoints in order from nearest to furthest) or
ALPHANUMERIC LIST (lists waypoints in alphanumeric order) soft key.
35 47.010'N
135 21.000'W
34 42.000'N
135 21.050'W
34 41.000'N
135 21.030'W
38 44.300'N
135 21.010'W
PUSH ENTER KNOB TO
SEARCH FOR
Alphanumeric waypoint list
4. Press the NEW WPT soft key to show the waypoint window (see the figure
on the previous page). Own ship position is shown in the position box.
5. Select the position box and enter position desired.
6. If desired, change waypoint data following the instructions from step 6 in
"Entering a waypoint with the cursor" on page 2-30.
7. Press the SAVE soft key to register the waypoint.
8. Press the [MENU] key to close the menu.
2.8.2

Editing waypoint data

Waypoint data may be edited from the waypoint list or directly from the plotter
display.
Editing waypoint data from the waypoint list
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key as appropriate.
4. Use the cursor pad to select the waypoint you want to edit.
5. Press the EDIT WPT soft key.
6. Edit data as appropriate.
2-32
ABALONE
00:00 01JAN01
350.9
3.80 nm
CRAB
00:00 01JAN01
050.9
1.98 nm
FISH
00:00 01JAN01
065.9
1.83 nm
LOBSTER
00:00 01JAN01
144.9
4.93nm
---
Alphanumeric and local waypoint lists
WPT
ALPHA
FISH
00:00 01JAN01
GOTO
34 41.000'N
135 21.030'W
CRAB
NEW
00:00 01JAN01
WPT
34 42.000'N
135 21.050'W
EDIT
WPT
ABALONE
00:00 01JAN01
35 47.010'N
ERASE
135 21.000'W
WPT
LOBSTER
00:00 01JAN01
RETURN
38 44.300'N
135 21.010'W
WPT
LOCAL
065.9 GOTO
1.83 nm
NEW
WPT
050.9
1.98 nm
EDIT
WPT
350.9
ERASE
3.80 nm
WPT
RETURN
144.9
4.93nm
Local waypoint list