VTech Innotab 2 Blue User Manual page 28

Clock time is not
accurate
Touch screen is
inaccurate or it is
impossible to select
the correct icon on
the screen.
Inserted an SD card
(not included), but
the tablet cannot
recognize it.
Files copied
to the tablet's
internal memory
disappeared.
If your InnoTab
carefully try the following:
• Remove all batteries and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based window
cleaner to gently clean the contact area of the cartridge slot.
• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Please make sure that all parts are completely dry before restoring
electricity.
Static electricity may cause the InnoTab
the game play score stored in the tablet memory may be lost. In cases
where InnoTab
®
by removing and reinstalling the batteries, or by unplugging and replugging
the AC adaptor. Or, if the static electricity malfunction occurred during the
downloading process, disconnect the USB cable, delete the corrupted file,
and reset the tablet as described above. Then reconnect the USB cable
and restart the download process.
25
Backup battery power
low
Touch screen requires
calibration.
SD card format is not
FAT32.
The tablet's memory
was not formatted to
FAT32.
2 does not respond to an inserted cartridge, please
®
2 is malfunctioning due to static electricity, reset the tablet
Replace backup battery (for
backup battery replacement
instructions, please see the
Care & Maintenance section on
page 23).
Turn the InnoTab
hold ,
when turning the InnoTab
Follow the steps on the screen.
Format the SD card to FAT32 in
your computer.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
2 to malfunction. In some cases,
®
2 OFF. Then
®
and down
2 ON.
®