Panasonic AW-HE120KE Operating Instructions Manual page 77

Web setting screen
 Server 
This screen has items that relate to the NTP server addresses, port numbers and other NTP server settings.
NTP screen
 Time adjustment
<Initial setting: Off>
Select one of the following settings as the time adjustment
method.
The time is adjusted by the method selected here and
used as the unit's standard time.
Off The time is counted from 0:00 on
January 1, 1990 as the unit's startup
time.
Synchronization The time automatically adjusted in
with NTP server synchronization with the NTP server is
used as the unit's standard time.
 NTP server address
[1 to 128 half-size characters]
<Initial setting: blank>
The host name or IP address of the NTP server is input
here.
Note
  To input the "NTP server address" host name, the
DNS setting must be selected on the Network
screen (see page 79) of the Network settings.
(continued)
 NTP port [1 to 65535]
<Initial setting: 123>
The port number of the NTP server is input here.
 Time adjustment interval
<Initial setting: 1h>
The interval (1 to 24 hours in 1-hour increments) for
acquiring the time from the NTP server and updating the
time is selected here.
 Time zone
<Initial setting: (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London>
Select the time zone that corresponds with the region in
which the unit is going to be used.
77