Control Exercised From The Remote Camera Controller Aw-Rp50 - Panasonic AW-HE120KE Operating Instructions Manual

Basic operations
 Control exercised from the Remote Camera Controller AW-RP50 
POWER
MENU
STORE
IRIS
TELE
ZOOM
 Procedure for camera menu operation (AW-RP50) 
1
Press one of the [CAMERA STATUS/
SELECTION] buttons to select the unit which
is to be operated.
2
Press the [CAMERA OSD] button of the
AW-RP50 for 2 seconds.
The camera menu of the AW-HE120 is displayed on the
monitor.
3
Turn the F1 dial to select the AW-HE120
camera menu item or change the data.
Turn the F1 dial to move the cursor up or down or
change the setting.
Press it to move to the menu at the next lower
hierarchical level or change a blinking setting at the very
bottom hierarchical level.
The scene names displayed on the panel of the
AW-RP50 correlate with the scene files of the
AW-HE120 as shown below.
AW-RP50 display
F-AUTO
MANU1
MANU2
MANU3
36
(continued)
ALARM
1 2 3
PAGE GAIN/PED R/B GAIN R/B PED
6 7 8
DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2 3
AUTO
CAMERA STATUS / SELECTION
AUTO
WIDE FOCUS/PUSH OAF
For selecting the cameras to be operated.
AW-HE120 scene file
Scene1
Scene2
Scene3
Scene4
F1
F2
F1 CAMERA
OSD
4 5
AWB/ABB SHUTTER F2 EXIT
9 10
SETUP SYSTEM USER1 USER2
4 5
PT ACTIVE
LOW HI
PTZ/FOCUS SPEED
There are differences in the displays for the following menu
items between when these items are set on the LCD of the
AW-RP50 and when they are set using the camera menu.
Gain
Pedestal* 1
R Gain* 2
B Gain* 2
AWB Mode
White Balance
Mode
Shutter Mode
*1: The –10 and +10 pedestal settings for the AW-RP50
correspond to –150 and +150 on the camera menu,
respectively.
*2: The –30 and +30 gain settings for the AW-RP50 correspond
to –150 and +150 on the camera menu, respectively.
4
Press the [CAMERA OSD] button for 2 seconds
to exit the camera menu.
For operating the camera menus.
CAMERA OSD:
When this is pressed for
2 seconds, the selected camera
menu is displayed, overlapping
the camera output image.
When it is pressed for
2 seconds while a camera
menu is displayed, the menu is
cleared.
F1: Turn F1 to move the cursor up
or down on the camera menu or
change the setting.
Press it when moving to
the menu at the next lower
hierarchical level or changing
a setting at the very bottom
hierarchical level.
LCD of AW-RP50 Camera menu
Selected in a range Selected in a range
from 0 dB to 18 dB in from 0 dB to 18 dB in
3 dB steps. 1 dB steps.
21 steps 301 steps
from –10 to +10 from –150 to +150
61 steps 301 steps
from –30 to +30 from –150 to +150
3200K or 5600K 3200K or 5600K can
cannot be selected. be selected.
ELC cannot be
ELC can be selected.
selected.