Web Setting Screen - Panasonic AW-HE120KE Operating Instructions Manual

Web setting screen

Connect the unit and a personal computer, and establishing
the settings on the Web browser screen.
The LAN crossover cable is used when connecting a
personal computer directly to the unit's LAN connector for IP
control, and the LAN straight cable is used when making the
connection through a switching hub.
Select an IP address for the personal computer within the
private address range while ensuring that it is different from
the address of the unit.
Set the subnet mask to the same address as the unit.
Notes
  If you need to change the IP address and subnet
mask, be sure to ask your dealer to make these
changes for you.
Unit's IP address and subnet mask (factory settings)
IP address: 192.168.0.10
Subnet mask: 255.255.255.0
Range of private addresses:
192.168.0.0 to 192.168.0.255
  If the controller and web browser are being used at the
same time, the content selected using the controller
may not be reflected on the web browser display.
When using both the controller and web browser,
be absolutely sure to check the settings using the
controller or camera menu.
For details of the required personal computer
environment, refer to page 4.
55