Advertisement
Installing
Cooking
Components
Important:
Before cooking on your grill the first
time, wash the Cooking Grids with warm, soapy
water. Rinse and dry thoroughly. Season with
cooking oil regularly. After cooking is completed,
turn grill to HIGH setting for about five minutes to
burn off excess grease or food residue.
1. Place the 4 Steel Flame Tamers on the lower
ledge above Burners.
2.
Evenly space the Cooking Grids on the ledge
above the Flame Tamers.
3. Place the Secondary
Cooking
Rack into the
slots on the upper left and upper right of Grill
Bowl Panels.
SECONDARY
COOKING
RACK
COOKING
GRID_
STEELFLAME
TAMER
RACK
_r_
LP Gas
Model
Only
Connecting
A Liquid Propane Gas
(LP gas) Tank To Your Grill
1.
Open the front Doors of cabinet. Pull out the
Tank Pull-Out Tray. Place a 20 lb tank with
foot ring into the hole in the tray. Make sure
the tank valve is in the OFF positon. (Turn
clockwise
to close.) Align the tank so the
Tank Valve faces the rear right corner of
cabinet. Use provided Wing Bolt to secure
gas tank. See
Wing
Bolt 1/4"x2+3/4"
Qty, 1
Ref. # $233G04332
<
J
2.
.
4.
.
.
Check the tank valve to ensure it has proper
external
mating threads to fit the hose &
regulator assembly provided. (Type 1 connec-
tion per ANSI Z21.58b-2002)
Be sure all Burner Valves are in the OFF
position.
Inspect the valve connection
port and regulator
assembly.
Look for damage or debris. Remove
any debris. Inspect hose for damage. Never
use damaged
or plugged equipment.
When connecting
the regulator assembly to
the tank valve,
hand tighten nut clockwise
to
a full stop. See _
DO NOT use a
wrench to tighten because it could damage
the Quick Coupling
Nut and result in a
hazardous condition.
Open the tank valve fully (counterclockwise).
Use a soapy water solution to check all
connections
for leaks before attempting
to light
your grill. See "Checking
for LP Gas Leaks"
on page 23. If a leak is found, turn the tank
valve off and do not use your grill until the
leak is repaired.
Type t connection
per ANSI Z21.58b-2002
QUICK j
COUPLING
NUT
CAUTION: When the appliance
is not in use, the
gas must be turned off at the supply tank.
Disconnecting
A Liquid Propane Gas
(LP gas) Tank From Your Grill
1.
Turn the Burner Valves and LP gas tank valve
to the full OFF position.
(Turn clockwise
to
close.)
2.
Detach the hose and regulator
assembly from
the LP gas tank valve by turning the Quick
Coupling Nut counterclockwise.
22
Advertisement
