Config System Pstn - Fortinet FortiGate Voice 4.0 MR1 Administration Manual

Version 4.0 mr1
Hide thumbs Also See for FortiGate Voice 4.0 MR1:
Table of Contents

Advertisement

FortiGate Voice VoIP, PBX, and PSTN CLI Reference

config system pstn

Syntax
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
http://docs.fortinet.com/
Feedback
Use this command to configure the PSTN interfaces. PSTN interfaces are available on
some FortiGate Voice models.
config system pstn
edit <fxo_name>
set
cid-name <caller_name>
set
cid-number <caller_name>
set
status {enable | disable}
set
user-callerid {enable | disable}
set
cid-signalling {bell | dtmf | v23 | v23-jp}
set
cid-start {polarity | ring}
set
send-callerid-after <integer>
set
hangup-on-polarity-reversal
set
hangup-on-zero-voltage
set
hangup-on-busy-tone
set
busycount <integer>
set
busy-tone-length <integer>
set
busy-quiet-length <integer>
set
codec {alaw | ulaw}
end
Variables
edit <fxo_name>
cid-name
<caller_name>
cid-number
<caller_name>
status
{enable | disable}
user-callerid
{enable | disable}
cid-signalling {bell
| dtmf | v23 |
v23-jp}
cid-start
{polarity | ring}
send-callerid-after
<integer>
hangup-on-polarity-
reversal
hangup-on-zero-
voltage
hangup-on-busy-tone
busycount <integer>
Description
Enter the name of the FXO.
This name is used for caller ID for calls from the FortiGate
Voice unit to the PSTN. It can be any name, such as a
company name, that identifies the branch office.
Enter the phone number of the PSTN phone line as
provided by your phone service provider.
Enable the status of the port.
Enable to catch the caller ID.
Enter the caller ID protocol. The protocol v23-jp is the v23
protocol for Japan.
Enter to start transmitting the caller ID.
Enter a number for the number of rings after that the caller
ID began to transmit.
Enter to have the phone hang up when there is polarity
reversal.
Enter to have the phone hang up when there is zero
voltage.
Enter to have the phone hang up when a busy tone is
detected.
Enter a number for the accurate number of busy tones that
are detected.
config system pstn
Default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
No
default
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate voice-80cFortigate voice series

Table of Contents