Table of Contents
Advertisement
Example FortiGate Voice branch office configuration
Configuring the FortiFones on the internal network
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
http://docs.fortinet.com/
•
Feedback
Password
Dial Plan
Voicemail
Voicemail Password
Email Notification
Email Attachment
Auto Delete
Maximum Message #
3 Select OK to add the extension.
4 Repeat to add more extensions.
This section contains high-level instructions for installing and configuring FortiFones for
the example configuration. For more detailed information see the FortiFone
documentation.
To configure FortiFones on the internal network
The following steps describe how to configure a FortiFone on the internal network with
extension number 6001. This procedure would also apply to configuring a FortiFone for
most networks. See the documentation supplied with the FortiFone for details.
1 Connect and power on the FortiFone handset.
2 Connect to the handset web configuration interface.
The default web configuration interface address is http://192.168.0.1. To connect to this
address from a PC, your PC should have an IP address on the 192.168.0.0 subnet, for
example: 192.168.0.10/255.255.255.0.
The default Username is root. No password is required.
3 Go to Network > LAN Settings and set the IP Type to DHCP Client and select Submit.
4 Select Save & Reboot to save the IP addressing change.
5 Log into the FortiFone using the IP address it acquired from the DHCP server.
6 Go to SIP Settings > Service Domain and add the following configuration information:
Active
Display Name
Configuring the FortiFones on the internal network
The SIP phone user password for the phone assigned to this
extension.
For a FortiFone on the internal network to be able to register with
the FortiGate Voice unit to get this extension, the FortiFone
Register Name must consist of the extension First Name
followed by the Last Name separated by one space. The
FortiFone must also be configured with this Password and the IP
address of the FortiGate Voice internal interface.
Dial_Plan_1
Select
Enter the numeric password that the SIP user must enter to get
voicemail. The password can contain numbers only.
Select
Select to attach a recording of the user's voicemail message to
the voicemail notification email.
Select to automatically delete voicemail messages.
50
The FortiGate Voice unit keeps up to 50 voicemail messages for
this extension.
On
The name to be displayed on the phone. This name is only
displayed on this phone. When this phone calls another phone
the name displayed is the First Name and Last Name added to
the FortiGate Voice Extension configuration.
27
Advertisement
Table of Contents
