Config Pbx Smtp - Fortinet FortiGate Voice 4.0 MR1 Administration Manual

config pbx smtp

Syntax
config pbx smtp
Syntax
54
config pbx ringgrp
edit <ring_group_name>
set description <description_str>
set member <acd_group_member>
set no-answer-action {hangup | ivr | voicemail}
set strategy {ring-all | sequential}
set voicemail-of-extension <extension_number>
end
Variables
edit
<ring_group_name>
description
<description_str>
member
<acd_group_member>
no-answer-action
{hangup | ivr |
voicemail}
strategy {ring-all |
sequential}
voicemail-of-
extension
<extension_number>
Use this command to configure the FortiGate Voice unit to send voicemail notification
email messages. Using this command you configure the email server that the FortiGate
Voice unit sends email notifications to.
config pbx smtp
set port <smtp_server_port>
set server <smtp_server_ip_ address>
set authenticate {enable | disable}
set password <password_str>
set username <username_str>
end
FortiGate Voice VoIP, PBX, and PSTN CLI Reference
Description
Enter the name for the group.
A description of the extension group.
Enter the ACD member for the group.
Enter the action that will be taken when none of the
extensions in the ring group answers.
• hangup hand up and end the call.
• ivr return the caller to the attendant where they can
try another extension.
• voicemail the caller is directed to the voicemail
system where they can leave a message.
Control how the extensions in the group are called by the
ring group.
• ring-all calls all of the extensions in the group at
the same time.
• sequential calls the extensions in the group one at a
time in the order in which they have been added to the
group.
Enter the extension number to use for voicemail if no one
answers the call and no-answer-action is set to
voicemail.
FortiGate Voice Version 4.0 MR1 Administration Guide
Default
No
default.
No
default
No
default
No
default
No
default
01-410-112851-20100601
http://docs.fortinet.com/ • Feedback