Bertazzoni KIN 30 PRO X Instruction Booklet page 11

H
FILTERS
1. METAL FILTERS
To remove the metal grease-trapping filter, using the handle A until releas-
ing it from the guide. To reposition the filter, repeat the operation in the
reverse order.
I
LIGHTING
SPOTLIGHT
How to replace a square halogen light:
a) Check that the equipment is disconnected from the power supply.
b) Open the panel completely till 90° (see figure) pressing the PUSH button.
c) Replace the lamp with a similar one (halogen, max 20W, 12 Volt, G4 connec-
tion).
d) Close the panel. If the panel does not close correctly repeat the operation at
point b.
REMOVING AND REPLACING'S INSTRUCTIONS
ASSEMBLY AND REPLACEMENT
9