NordicTrack T5.7 NTL61011.1 User Manual page 12

10. Set the console assembly on the Left and Right
Handrails (71, 72). Make sure that no wires
are pinched. Insert the excess Upright Wire
(70) into the Left Handrail.
Attach the console assembly to the brackets
on the Handrails (71, 72) with two 5/16" x 1"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws, and then tighten them.
11. Attach the two Console Clamps (96) to the con-
sole assembly with four #8 x 3/4" Screws (6).
See step 3. Tighten all six 3/8" x 4" Screws (4).
12. Identify the Left and Right Trays (97, 98), which
are marked "L" and "R." Orient the Trays as
shown and attach each Tray with four #8 x 3/4"
Screws. Start all of the Screws before tight-
ening them. Be careful not to overtighten the
Screws.
10
72
8
7
11
12
Console
Assembly
6
12
Console
Assembly
87
70
71
8
7
Console
Assembly
96
6
98
97
6
6
6