Belkin N1 vision User Manual page 45

Wireless modem router

Hide thumbs Also See for N1 vision:

Table of Contents

Alternate Setup Method

Setting your Connection Type to Modem Only (Disable Internet Sharing)

in this mode, the router simply acts as a bridge passing packets across the

dsl port . it requires additional software to be installed on your computers

in order to access the internet .

1. VPI/VCI –

identifiers are assigned by your isP .

2. Encapsulation –

isP uses .

Click "Apply Changes" to save and activate your settings . to go back to

the original settings before saving, click "Clear Changes"; or click any of the

quick-navigation links for other options . Your new settings will not be saved

unless you click "Apply Changes" .

enter your VPi and VCi parameter here . these

select the llC or VC muX that your

(1)

(2)

Table of Contents