Belkin N1 vision User Manual page 44

Alternate Setup Method
Setting your ISP Connection Type to Static IP (IPoA)
this connection type is also called "Classical iP over Atm" or "CliP", which
your isP provides to a fixed iP for your router to connect to the internet .
1. IP Address –
router's WAN interface .
2. Subnet Mask –
3. Default gateway –
the router cannot find the destination address within its local
network, it will forward the packets to the default gateway
assigned by your isP .
4. VPI/VCI –
identifiers are assigned by your isP .
5. Encapsulation –
Click "Apply Changes" to save and activate your settings . to go back to
the original settings before saving, click "Clear Changes"; or click any of the
quick-navigation links for other options . Your new settings will not be saved
unless you click "Apply Changes" .
enter an iP address assigned by your isP for the
enter a subnet mask assigned by your isP .
enter a default gateway iP address . if
enter your VPi and VCi parameter here . these
select llC or VC muX that your isP uses .
(1)
(2)
(3)
(4)
(5)
43