Belkin N1 vision User Manual page 26

Connecting and Configuring your Router
to make a WPs connection, select the
"New Connection" option . to do so,
you must have WPs enabled on the
computer or device connecting to the
router . You will need to push the WPs
button in your computer or device
within two minutes .
B. Wireless Radio
disable Wireless – select this
option if you would like to disable
the wireless connection . this
will essentially end all wireless
connections to the router .
show info – select this option to
display wireless information for
channel, security, and bandwidth
settings .
C. Router Information
this option shows iP address and
connection-type settings .
D. Help and Tips
select this option for additional
information .
E. Power Save
select this option to conserve the
display's power or if you prefer
to turn off graphics . When power
save is oN, the display will turn
off within two minutes after any
user interaction .
25