L2Tp - Belkin N300 User Manual

VPN

L2TP

L2TP
Select the desired authentication
Authentication protocol (PAP, CHAP, MSCHAP_V2).
Select MSCHAP_V2 by default
Select accounts form available Users to
member for authentication. You should set
Account
these available users in user setting page.
Network
Network
Assign the VPN Server IP address.
Server IP
(example: 192.168.99.1)
Assign a range of IP addresses. The assigned
IP range should be on the same range as the
Remote IP Range
Server IP (example: 192.168.99.21 – 50)
95