advanced
Routing
If your WIRELESS ROUTER device is connected to a
network with different subnets, then this feature will allow
the different subnets to communicate with each other.
Static Routing
enable Static Routing
destination Lan IP
Subnet Mask
default Gateway
Hops
Interface
Check this box to Enable the Static Router feature.
Enter the IP address of the destination LAN.
Enter the Subnet Mask of the destination LAN IP address
Enter the IP address of the Default Gateway for this destination IP and Subnet.
Specify the maximum number of Hops in the static routing rule.
Select whether the routing applies to LAN or WAN interfaces.
83