Belkin N300 User Manual page 55

WIRELESS
Basic
Radio
Mode
Band
Enable SSID#
SSID#
Auto Channel
Channel
Check Channel Time
Enable or Disable the device's wireless signal.
Select between Access Point or Wireless Distribution System (WDS) modes.
Select the types of wireless clients that the device will accept.
e.g.: 2.4 GHz (B+G+N)
Only 802.11b and 11g clients will be allowed.
Select the number of SSID's (Wireless Network names) you would like.
You can create up to 4 separate wireless networks.
Enter the name of your wireless network. You can use up to 32 characters.
When enabled, the device will scan the wireless signals around your
area and select the channel with the least interference.
Manually select which channel the wireless signal will use.
When Auto Channel is Enabled, you can specify the period that the
device will scan the wireless signals around your area.
52