Belkin N300 User Manual page 68

WIRELESS
Wi-Fi Protected Setup (WPS)
WPS
WPS Button
Wi-Fi Protected Setup Information
WPS Current Status
SSID
Authentication Mode
Passphrase Key
WPS Via Push Button
WPS Via PIN
Check to Enable the WPS feature.
Check to Enable the WPS push button.
Shows whether the WPS function is Configured or Un-configured.
Configured means that WPS has been used to authorize a connection
between the device and wireless clients.
The SSID (wireless network name) used when connecting using WPS.
Shows the encryption method used by the WPS process.
This is the passphrase key that is randomly generated during the WPS process. It is required
if wireless clients that do not support WPS attempt to connect to the wireless network.
Click this button to initialize the WPS feature using the push button method.
Enter the PIN code of the wireless device and click this button to
initialize the WPS feature using the PIN method.
65